🔧 Digital Inverter Fridge Error Codes? Complete Brand-Wise Troubleshooting Guide

⚠️

Problem Overview

Your digital inverter refrigerator's display is showing an error code like dE, 5E, rF, FF, or other alphanumeric codes, and you're unsure what it means or how to fix it. Modern inverter refrigerators use error codes to communicate specific issues—from simple door sensor problems to serious compressor failures. This comprehensive guide decodes error codes for top Indian fridge brands (Samsung, LG, Whirlpool, Haier, Godrej) and provides clear troubleshooting steps for each code type, including when issues are covered under warranty.

Safety First

!
Unplug before internal inspection: For any troubleshooting beyond display checks and external cleaning, unplug refrigerator from power outlet to prevent electric shock.
!
Never ignore cooling failure codes: Error codes indicating compressor failure, refrigerant leaks, or temperature control issues can lead to food spoilage and equipment damage. Address immediately.
!
Warranty preservation is critical: Digital inverter refrigerators typically come with 10-20 year compressor warranties. Opening sealed components or unauthorized repairs will void warranty coverage.
!
Document error codes immediately: Take clear photos of error code display before attempting any resets. If problem recurs, this documentation helps technicians diagnose faster and validates warranty claims.
!
Food safety during repairs: If refrigerator will be off for more than 2 hours, transfer perishables to cooler with ice. Error codes indicating complete cooling failure require immediate action to prevent food spoilage.

🔍 Quick Diagnosis Steps ⏱️ 2-5 minutes

1 Note the Complete Error Code

Record the exact error code with all letters, numbers, and symbols (dE, 5E, rF, FF, Er dH, etc.). Some codes combine letters and numbers—both parts are important for accurate diagnosis.

2 Identify Brand & Model Number

Check inside fridge door or back panel for brand name and complete model number. Same error code means different things across brands—Samsung dE differs from LG dE code.

3 Check Error Persistence

Unplug refrigerator from wall outlet, wait 5 minutes, plug back in. If error clears and fridge operates normally, it was temporary glitch. If error returns immediately, underlying issue needs fixing.

4 Perform Basic Visual Checks

Before calling service: Ensure doors close properly, no ice buildup blocking vents, temperature settings haven't changed, and power outlet is working. Simple issues cause many error codes.

5 Listen for Unusual Sounds

Note if compressor is running, making clicking sounds, or completely silent. Combined with error code, this helps diagnose: fan motor issues, compressor problems, or control board faults.

6 Check Warranty Status

Locate purchase receipt or warranty card. Digital inverter fridges have extended compressor warranties (10-20 years)—many error codes indicate warranty-covered repairs. Verify before paying for service.

📋 Understanding Error Code Categories

Door & Sensor Errors (dE, dH, do, DS)

These codes indicate door-related issues: door not closing properly, door sensor malfunction, or door left open for extended period. Usually caused by misaligned doors, worn gaskets, faulty door switches, or items blocking closure.

Typical fix: Door adjustment (DIY), gasket replacement (₹800-₹2,000), door switch replacement (₹500-₹1,500), sensor cleaning (DIY)

Temperature & Cooling Errors (5E, rF, FF, Er)

Temperature-related codes indicate cooling system issues: freezer too warm, refrigerator section not cooling, ice buildup, or temperature sensor failures. May signal compressor problems, refrigerant issues, or fan motor failures.

Typical fix: Temperature sensor replacement (₹800-₹2,000), defrost system repair (₹1,500-₹3,500), fan motor replacement (₹2,500-₹5,000), compressor work (warranty-covered)

Ice Maker & Water Dispenser Errors (IE, 1E, 39, 88)

Codes related to ice making and water dispensing functions: ice maker not producing ice, water filter issues, dispenser sensor problems, or water valve malfunctions. Common in side-by-side and French door models with water features.

Typical fix: Water filter replacement (₹1,500-₹3,500), ice maker assembly replacement (₹3,000-₹6,000), water valve replacement (₹1,500-₹3,000), sensor cleaning (DIY)

Compressor & Control Board Errors (Er rF, Er FF, 22, 33)

Critical errors indicating inverter compressor faults, control board malfunctions, voltage problems, or communication failures between components. These are serious issues requiring immediate professional attention and often covered under extended compressor warranties.

Typical fix: Control board replacement (₹3,500-₹8,000), voltage stabilizer installation (₹2,500-₹5,000), compressor replacement (warranty-covered: ₹0, out-of-warranty: ₹8,000-₹18,000)

🏭 Brand-Wise Error Code Tables

1️⃣ Samsung Digital Inverter Refrigerator Error Codes

Error Code	Problem Description	Likely Cause	DIY?
dE	Door error / Door open alarm	Door not closing properly, faulty door switch, misaligned gasket	✓
5E	Defrost sensor error	Defrost temperature sensor malfunction or disconnection	✗
1E	Ice maker sensor error	Ice maker temperature sensor faulty or ice bucket misaligned	△
5D	Fridge section defrost sensor	Refrigerator compartment defrost sensor issue	✗
SE	Freezer section sensor error	Freezer temperature sensor malfunction	✗
rE	Refrigerator section sensor error	Fridge compartment temperature sensor fault	✗
RD	Rapid defrost mode active	Auto defrost cycle running (normal operation, not fault)	✓
22	Fridge fan motor error	Refrigerator fan motor failure or obstruction	✗
33	Freezer fan motor error	Freezer fan motor malfunction or ice blockage	✗
39	Ice maker motor error	Ice maker motor jammed or faulty	✗
Er rF / Er FF	Compressor/inverter system error	Inverter compressor fault, control board issue, voltage problem	✗

Legend: ✓ = DIY possible | △ = DIY check only, pro repair | ✗ = Professional only

2️⃣ LG Inverter Linear Compressor Refrigerator Error Codes

Error Code	Problem Description	Likely Cause	DIY?
dH	Door heating system malfunction	Door condensation heater issue (French door models)	✗
Er dH	Defrost heater error	Defrost heater circuit failure or thermistor issue	✗
Er FF	Freezer fan motor error	Fan motor failure or excessive ice buildup blocking fan	✗
Er rF	Refrigerator fan motor error	Fridge compartment fan motor malfunction	✗
Er IS	Ice maker sensor error	Ice maker temperature sensor or optics sensor fault	✗
Er CF	Compressor communication failure	Linear compressor inverter board communication error	✗
Er 1F	Freezer sensor error	Freezer thermistor disconnected or faulty	✗
Er 2F	Refrigerator sensor error	Fridge compartment thermistor malfunction	✗
FS	Freezer section too warm	Cooling system failure, door left open, or defrost issue	△
RS	Refrigerator section too warm	Insufficient cooling, door seal issue, or fan problem	△
CO / CE	Communication error between boards	Display PCB and main control board connection issue	✗

3️⃣ Whirlpool Inverter Refrigerator Error Codes

Error Code	Problem Description	Likely Cause	DIY?
SY EF	Evaporator fan motor error	Fan motor failure or wiring disconnection	✗
SY CE	Communication error	Control board communication failure	✗
SY CF	Condenser fan motor error	Condenser fan motor malfunction (external cooling fan)	✗
PO / PE	Power failure detected	Recent power outage notification (informational, not fault)	✓
dI	Dispenser ice motor error	Ice dispenser motor jammed or faulty	△
dF	Dispenser flap motor error	Dispenser door mechanism failure	✗
01	Freezer thermistor error	Freezer temperature sensor disconnected or shorted	✗
02	Refrigerator thermistor error	Fridge temperature sensor malfunction	✗
04	Defrost thermistor error	Defrost temperature sensor fault	✗
H	High temperature alarm	Freezer or fridge temperature too high (door open, failure)	△

4️⃣ Haier Inverter Refrigerator Error Codes

Error Code	Problem Description	Likely Cause	DIY?
E0	Freezer sensor error	Freezer thermistor open circuit or short circuit	✗
E1	Refrigerator sensor error	Fridge compartment thermistor malfunction	✗
E2	Defrost sensor error	Defrost thermistor disconnected or faulty	✗
E3	Ambient sensor error	Room temperature sensor fault (for adaptive cooling)	✗
E4	Communication error	Control board communication failure	✗
E5	Defrost system malfunction	Defrost heater or timer circuit failure	✗
E6	Compressor overload protection	Compressor overheating or electrical overload	✗
E7	Fan motor error	Evaporator or condenser fan motor failure	✗
F0	Freezer high temperature alarm	Freezer too warm, door open, or cooling failure	△
F1	Fridge high temperature alarm	Refrigerator compartment too warm	△

5️⃣ Godrej Inverter Refrigerator Error Codes

Error Code	Problem Description	Likely Cause	DIY?
E1	Freezer sensor failure	Freezer thermistor circuit open or short	✗
E2	Refrigerator sensor failure	Fridge thermistor malfunction	✗
E3	Ambient temperature sensor error	Room temperature sensor faulty	✗
E4	Evaporator sensor error	Evaporator coil temperature sensor issue	✗
E5	Defrost sensor error	Defrost thermistor disconnected or faulty	✗
E6	Communication failure	PCB communication error between control boards	✗
E7	Compressor drive error	Inverter compressor control fault	✗
F1	Freezer over-temperature alarm	Freezer temperature exceeds safe limit	△
F2	Refrigerator over-temperature alarm	Fridge compartment too warm	△
do	Door open alarm	Door left open for extended period (informational)	✓

🛠️ DIY Troubleshooting & Reset Procedures

Universal Refrigerator Reset Procedure

Works for most temporary error codes across all brands:
• Press and hold power button on control panel for 5 seconds to turn off
• Unplug refrigerator from wall outlet (don't just turn off—fully disconnect)
• Wait 10-15 minutes (allows control boards to fully reset, capacitors to discharge)
• Plug refrigerator back into outlet
• Press power button to turn on, wait 2-3 minutes for display to initialize
• Observe if error code clears and compressor starts normally

💡 Success Rate: This reset clears approximately 40-50% of temporary error codes caused by power fluctuations, static discharge, or minor electronic glitches. If error returns within 24 hours, underlying hardware problem needs fixing.

Fix Door Error Codes (dE, dH, do, DS)

Door-related errors are often DIY-fixable:
• Check if doors close fully—remove items blocking closure from inside
• Inspect door gasket (rubber seal)—clean with warm soapy water, remove sticky residue
• Test door alignment—close door and check if gaps visible when closed
• Adjust door if misaligned—loosen hinge screws slightly, realign door, retighten
• Test door switch—open door and locate small button/switch that activates light
• Press switch manually—if light doesn't respond, switch may be faulty
• Clean door sensor contacts with dry cloth if visible corrosion present

⚠️ Important: Door errors that persist after these checks indicate faulty door switch (₹500-₹1,500 replacement) or damaged gasket (₹800-₹2,000 replacement)—requires technician.

Address Temperature Alarm Codes (F0, F1, FS, RS, H)

High temperature alarms indicate cooling issues—quick checks:
• Verify power supply—ensure refrigerator is plugged in and outlet works
• Check temperature settings—ensure not accidentally set to higher temperatures
• Ensure proper door closure—temperature alarms often triggered by door left open
• Clear air vents inside—remove items blocking air circulation vents in both compartments
• Check for ice blockage—excessive frost on evaporator coils blocks airflow
• Listen for compressor—place hand on back, feel for vibration (compressor running)
• Wait 2-4 hours after reset—fridge needs time to reach proper temperature

💡 Pro Tip: Temperature alarms after power outages are normal—fridge needs 4-6 hours to stabilize. If alarm persists beyond 8 hours with proper closure and power, indicates cooling system failure requiring service.

Clear Ice Buildup (For FF, Er FF fan errors)

Excessive ice can trigger fan motor errors—manual defrost procedure:
• Remove all food and store in cooler with ice packs
• Unplug refrigerator completely from power outlet
• Open all doors and drawers to allow warm air circulation
• Place towels on floor to absorb melting water
• Allow 6-8 hours for complete ice melt (or use fan to speed up—no heat!)
• Wipe down interior, remove all water and moisture
• Plug back in, wait for temperature to stabilize before restocking food

⚠️ Safety: Never use sharp tools, hair dryers, or heaters to remove ice—can damage plastic, refrigerant lines, or cause electrical hazards. Natural defrost only.

Ice Maker Error Resolution (1E, IE, 39, Er IS, dI)

Ice maker errors often fixable without technician:
• Check water supply—ensure water valve behind fridge is fully open
• Inspect water filter—replace if older than 6 months (clogged filter reduces flow)
• Reset ice maker—locate reset button (usually small hole), press and hold 10 seconds
• Check ice bucket position—ensure ice bin is properly seated, not tilted
• Remove ice clumps—empty bin, break apart clumped ice, reinstall empty bin
• Test dispenser manually—press dispenser paddle, listen for motor activation
• Verify water pressure—fill glass from dispenser, should have steady flow

💡 Pro Tip: Low water pressure (common in apartments) triggers ice maker errors. Minimum 20 PSI required for proper ice production. Install booster pump if pressure consistently low.

Voltage Check & Stabilization (For Er rF, Er FF, E6, E7 codes)

Inverter compressors are voltage-sensitive—verify electrical supply:
• Use multimeter to check voltage at outlet (should be 220-240V AC)
• Monitor voltage during compressor startup (voltage drop below 180V causes errors)
• Check if voltage stabilizer is installed—essential for inverter refrigerators
• Ensure refrigerator on dedicated circuit—not sharing with high-power appliances
• Install voltage stabilizer if not present (₹2,500-₹5,000 prevents compressor damage)
• Consider inverter battery backup in areas with frequent power cuts
• Contact electrician if consistent low voltage or frequent fluctuations

⚠️ Critical: Operating digital inverter refrigerator on low voltage (below 180V) or high voltage (above 270V) damages inverter board and compressor—NOT covered under warranty. Stabilizer is mandatory protection.

Brand-Specific Reset & Diagnostic Modes

Samsung: Press and hold "Freezer" + "Refrigerator" temp buttons simultaneously for 8 seconds for factory reset
LG: Press "Express Freeze" + "Refrigerator" buttons together for 5 seconds to reset errors
Whirlpool: Hold "Alarm Reset" button for 3 seconds; for full reset, unplug 15 minutes
Haier: Press "Smart" + "Super Cool" buttons simultaneously for 10 seconds
Godrej: Hold "Mode" button for 5 seconds to cycle through diagnostics, then reset

💡 Note: Factory reset clears all custom settings (temperature preferences, vacation mode, eco mode). Reconfigure after reset. Some models enter diagnostic mode instead—cycle through codes, then exit to clear.

📞 When to Call a Professional

🔴 Critical Errors - Immediate Service Required

• Compressor errors (Er rF, Er FF, Er CF, E6, E7)
• All sensor/thermistor errors (5E, SE, rE, E0-E5, 01-04)
• Fan motor failures (22, 33, Er FF, Er rF, E7, SY EF)
• Control board communication errors (CO, CE, E4, E6, SY CE)
• Persistent temperature alarms after reset (FS, RS, F0, F1)
• Any error with burning smell or unusual noises

🟡 Warranty Coverage - Check Before Paying

• Inverter compressor: 10-20 year warranty (brand-specific)
• Control boards: Usually 1-2 year comprehensive warranty
• Sensors/thermistors: 1-2 year parts warranty
• Fan motors: 1-2 year comprehensive warranty
• Ice maker assembly: 1 year warranty typically
• Defrost system: Covered under comprehensive warranty period

💰 Expected Repair Costs by Error Type (2025 India Prices)

Sensor Replacement: ₹800-₹2,000
Door Switch: ₹500-₹1,500
Door Gasket: ₹800-₹2,000
Service Visit (Diagnosis): ₹300-₹800

Fan Motor Replacement: ₹2,500-₹5,000
Defrost System Repair: ₹1,500-₹3,500
Ice Maker Assembly: ₹3,000-₹6,000
Water Filter (Genuine): ₹1,500-₹3,500

Control Board Replacement: ₹3,500-₹8,000
Inverter Board: ₹4,000-₹9,000
Compressor (warranty): Free
Compressor (out-of-warranty): ₹8,000-₹18,000

📋 Information to Provide Technician for Faster Service

• Exact error code displayed (take clear photo of control panel)
• Refrigerator brand, complete model number, and serial number
• Purchase date and warranty card/invoice (verify warranty coverage)
• When error first appeared and how frequently it occurs
• Current cooling status (both compartments, ice maker functioning)
• Any unusual sounds (clicking, buzzing, grinding, fan noise)
• Recent events (power outage, relocation, deep cleaning)
• Previous repairs or service history

🛡️ When Error Codes Indicate Warranty-Covered Issues

✅ Always Warranty-Covered (If Within Period)

✓
Compressor failures (Er rF, Er FF, Er CF, E6, E7) — 10-20 year compressor warranty
✓
Manufacturing defects in sensors, thermistors (all E-codes for sensors)
✓
Control board failures (CO, CE, communication errors) — comprehensive warranty
✓
Fan motor defects (22, 33, Er FF, Er rF) — comprehensive warranty period
✓
Defrost system malfunctions (5E, Er dH, E5) — parts warranty applies

❌ Typically NOT Warranty-Covered

✗
Voltage damage — Operating without voltage stabilizer voids warranty
✗
Physical damage — Door gasket wear, door switch damage from impact
✗
User-caused issues — Ice buildup from door left open, filter not changed
✗
Unauthorized repairs — Opening sealed components voids all warranties
✗
Improper installation — Damage from incorrect voltage, unstable placement

⚡ Critical Warranty Preservation Tips

• Always use voltage stabilizer: Most brands require stabilizer for warranty validity—check warranty card terms
• Keep purchase invoice: Required to prove warranty period—store safely with warranty card
• Use authorized service only: Unauthorized technicians void warranty—always call brand service center
• Register product online: Register within 30 days of purchase for faster warranty claims and service
• Document all service: Keep service reports, replaced part receipts for warranty tracking
• Annual maintenance: Some brands require annual preventive service for extended warranty validity

🛡️ Preventive Care & Error Code Prevention

📅

Monthly Maintenance

Clean door gaskets, check temperature consistency, verify ice maker operation, inspect for frost buildup, test door closure

🔄

Every 6 Months

Replace water filter, vacuum condenser coils (back/bottom), check drain pan, verify voltage with multimeter, professional inspection

⚡

Electrical Protection

Mandatory voltage stabilizer, dedicated 15A circuit, surge protector, inverter backup for power cuts—prevents 70% of error codes

💡 Error Code Prevention Best Practices:

• Voltage stabilizer is mandatory: Prevents Er rF, Er FF, E6, E7 compressor and inverter errors from power fluctuations
• Proper door closure habits: Always close doors fully, check gasket seal monthly—prevents dE, do, temperature alarm codes
• Regular filter replacement: Change water filter every 6 months—prevents ice maker errors, maintains water flow
• Avoid overloading: Don't block air vents, maintain 2-inch clearance at back—prevents cooling and fan errors
• Proper temperature settings: Freezer: -18°C to -20°C, Fridge: 2°C to 4°C—prevents unnecessary strain on compressor
• Periodic defrost: If frost builds up beyond 6mm, perform manual defrost—prevents fan motor blockage errors
• Clean condenser coils: Vacuum coils every 6 months—prevents overheating and compressor protection errors
• Immediate error attention: Don't ignore error codes—small sensor issues become expensive compressor failures

❓ Frequently Asked Questions

Q1: Error code returns immediately after reset. What does this indicate?

Persistent error code that reappears immediately after power reset indicates genuine hardware failure, not temporary glitch. Control board has detected actual fault (sensor disconnection, motor failure, compressor issue) and will keep displaying error until underlying problem is fixed. Common recurring errors: 5E (defrost sensor actually faulty), Er rF (compressor inverter board damaged), 22/33 (fan motor bearings failed). Document error pattern and call authorized service—problem will not resolve on its own and may worsen causing secondary damage.

Q2: Can I continue using refrigerator if error code shows but it's still cooling?

Depends on error type. Temperature alarms (F0, F1, FS, RS) or door errors (dE, do)—safe to use temporarily while arranging service, but food safety at risk if cooling degrades. Sensor errors (5E, SE, rE, E-codes)—refrigerator may appear functional but operating incorrectly (wrong temperature, excessive compressor cycling) causing food spoilage and energy waste. Compressor errors (Er rF, Er FF, E6, E7)—STOP using immediately—continued operation damages compressor permanently, converting warranty-covered repair into expensive replacement. Turn off, transfer perishables, call service urgently.

Q3: Same error code appears on different brand fridges—are solutions identical?

NO—error codes are brand-specific, not universal across manufacturers. Example: Samsung "5E" means defrost sensor error, but Whirlpool doesn't use "5E" code. Samsung "dE" is door error, LG "dH" is door heater issue—completely different problems. Even within same brand, older and newer models may use different code systems. Always reference your specific brand's error code table in this guide or user manual. Using wrong brand's interpretation leads to incorrect diagnosis, wasted service calls, and improper repairs.

Q4: Error appeared after power outage. Is refrigerator permanently damaged?

Usually NOT damaged—power surges during outages trigger temporary error codes from voltage spikes. Perform full reset: unplug 15 minutes, plug back in. If error clears and fridge operates normally for 24+ hours, no damage occurred. However, if error persists or recurs, power surge may have damaged sensitive components: control board, inverter board, compressor start relay. Modern inverter refrigerators have some surge protection, but severe spikes can cause failures. Prevention: Install spike guard and voltage stabilizer (₹2,500-₹5,000)—essential for inverter appliances in areas with unstable power.

Q5: How do I know if error code repair is covered under warranty?

Check warranty card and purchase invoice for exact coverage terms. Digital inverter refrigerators typically have: (1) Comprehensive warranty: 1-2 years covering all parts/components—sensors, motors, boards, gaskets; (2) Compressor warranty: 10-20 years covering inverter compressor failures. Error codes indicating sensor faults (all E-codes), fan motors (22, 33, FF), control boards (CO, CE)—covered if within comprehensive warranty period. Compressor errors (Er rF, Er FF, E6, E7)—covered for 10-20 years. HOWEVER, warranty VOIDS if: operated without voltage stabilizer (check warranty terms), unauthorized repairs attempted, physical damage, improper use. Always call brand's authorized service center first—they verify warranty status before visit.

Q6: Multiple error codes appearing simultaneously or alternating. What's happening?

Multiple error codes indicate either: (1) Cascading failures—one failed component causing others to malfunction (example: defrost sensor failure causes ice buildup, blocking fan, triggering fan error); (2) Control board malfunction—faulty main PCB misreading multiple sensors, displaying multiple false errors; (3) Power supply issues—unstable voltage causing entire system to malfunction, multiple protection circuits activating. Troubleshooting approach: Note all codes appearing, reset system, observe which code returns first (primary fault). If same 2-3 codes consistently appear together, indicates related systems. Professional diagnosis required with multimeter testing—don't replace multiple parts without proper diagnosis or costs escalate unnecessarily.

Q7: How long does typical refrigerator error code repair take?

Repair duration varies by fault type: Sensor replacement (5E, SE, rE, E-codes): 30-60 minutes | Door switch/gasket replacement: 45-90 minutes | Fan motor replacement (22, 33, FF): 1-2 hours | Control board replacement: 1-2 hours | Defrost system repair: 2-3 hours | Ice maker assembly replacement: 1-2 hours | Compressor replacement: 3-6 hours (major repair). Add diagnosis time (30-60 minutes) and parts procurement (1-3 days if technician doesn't carry part). For warranty repairs, service typically scheduled within 24-48 hours, but parts availability extends timelines. If fridge will be non-functional beyond 4 hours, arrange alternative cold storage for perishables.

Q8: Should I attempt DIY sensor or component replacement to save money?

STRONGLY NOT RECOMMENDED for digital inverter refrigerators. Reasons: (1) Voids warranty—opening sealed compartments, disconnecting sensors, or replacing parts yourself immediately voids all warranty coverage including 10-20 year compressor warranty; (2) Risk of secondary damage—incorrect sensor installation, wiring errors can damage expensive control boards (₹3,500-₹8,000); (3) Diagnostic complexity—same error code can have multiple causes—replacing sensor may not fix problem if actual issue is wiring or control board; (4) Safety hazards—refrigerant system, electrical components require professional handling. Only DIY-safe actions: door alignment, gasket cleaning, ice maker reset, filter replacement. All internal component work: authorized service only to preserve warranty and prevent damage.

⚠️ Disclaimer: This error code guide is for informational and diagnostic purposes only. Error codes indicate specific faults but don't replace professional diagnosis with proper tools and testing equipment. Refrigerant work, compressor repairs, electrical troubleshooting, and internal component replacement require certified technicians with brand-specific training. Never attempt to open sealed refrigeration system components, handle refrigerant, or perform electrical work yourself. Always verify warranty status before any repairs—unauthorized service voids all coverage including extended compressor warranties. Contact brand-authorized service centers for all repairs to maintain warranty validity. Information based on common error codes for digital inverter refrigerators as of 2025—specific models may have variations. Refer to your refrigerator's user manual for model-specific error code listings.

Recently Updated